Name *
Тази информация е необходима, за да се свържем с вас.
Email *
Моля посочете вашия имейл адрес, за да получите писмен отговор от нас. Тази информация ни е необходима, за да се свържем с вас по имейл. Тези детайли ще бъдат пренасочени към Отдел за връзка с клиента, за да отговорим на запитването ви.
Company *
Тази информация е необходима, за да се свържем с вас.
Message *
Информацията, която предоставяте ще бъде използвана с цел да се свържем с вас и няма да бъде използвана за други цели. Тази информация няма да бъде споделяна с трети страни и ще бъде заличена 6 месеца след последния ни контакт с вас.

Send

                                              Machining centers

Machining centers

Home > Machining centers > Linear Way Series > JHV-710 Vertical Machining Center

JHV-710 Vertical Machining Center


The JHV series feature 3-axis machining centers, suitable for the production of a wide range of products for the automotive industry, hydraulic and pneumatic components, dies and moulds, diverse prismatic parts, etc.

The major structural components have ...

Load more


Make an inquiry






 

Finite Element Analysis testing and inspection. The structural machine components have been tested under different finite limit stress conditions, so that the areas of largest stress concentration can be defined and reinforced.












All vertical machining centers undergo a number of accuracy inspections, including Renishaw's Ball Bar Test and Laser Inspection, with a measurement report available for machine tool customers. For additional information regarding the tests, visit the official Renishaw website.

 







X/Y/Z axis movement is implemented by hardened, high-precision ball screws, furnished with double nuts to eliminate backlash.

 








JHV-710 vertical machining center can be equipped with a spindle, directly coupled to the motor (choice of up to 15 000 rpm), or a built-in motor spindle (choice of up to 36 000 rpm).

 








A 24-tool magazine-type ATC allows for rapid tool change and minimum auxiliary operational time.

Tool change time: 1.5 sec (Tool to Tool).

 










A high-pressure coolant-through-spindle system (20,30,50,70 bar), featuring a separate coolant tank and filter.










Renishaw tool probing system.

 

Standard Accessories

  • Full splash guard
  • Belt type spindle 8 000 rpm, BT40
  • Spindle motor 5.5/7.5kW
  • Carousel type ATC 16 tools, BT40
  • Rigid Tapping  
  • Cooling system
  • Auto lubrication system
  • Spindle oil cooler unit
  • Heat exchanger
  • Telescopic cover for 3 axes
  • Work lamp
  • Three-color call light
  • Tools and tool box
  • Screw type chip conveyor with chip cart
  • Spindle air blow
  • Air gun
  • Coolant gun

Optional Accessories

  • Belt type spindle 10 000 / 12 000 rpm
  • Direct drive spindle 10 000 / 12 000 / 15 000 rpm
  • Built-in type spindle 16 000 / 36 000 rpm
  • Arm type ATC 24 tools, BT40
  • Chain type chip conveyor with chip cart
  • Coolant through spindle (with sealed splash guard), 20/30/70 bar
  • Oil skimmer - belt type
  • Oil skimmer - disk type
  • Chip flushing device
  • 4th axis rotary table
  • CNC tilting & rotary table
  • Tool measurement system
  • Workpiece measurement system
Parameter Unit JHV-710
ParameterGUIDEWAYS Unittype JHV-710 линейни
ParameterWidth of guideways X,Y,Z Unitmm JHV-710 30/30/35
ParameterTRAVEL: Unit- JHV-710
ParameterX axis travel Unitmm JHV-710 710
ParameterY axis travel Unitmm JHV-710 460
ParameterX axis travel Unitmm JHV-710 580
ParameterDistance from spindle nose to table surface Unitmm JHV-710 125-700
ParameterDistance from spindle center to column surface Unitmm JHV-710 490
ParameterTABLE: Unit- JHV-710
ParameterTable area Unitmm JHV-710 760x420
ParameterMax. load of table Unitkg JHV-710 450
ParameterT- slot Unitmm JHV-710 3x14x126
ParameterNo. of T- slots Unitpcs JHV-710 5
ParameterSPINDLE: Unit- JHV-710
ParameterSpindle taper Unittype JHV-710 BT-40
ParameterSpindle speed Unitrpm JHV-710 ремъчен:8000/10000 / директен:10000/12000/15000
ParameterSpindle drive Unittype JHV-710 ремъчен / директен
ParameterSpindle motor UnitkW JHV-710 5.5/7.5
ParameterSpindle cooling Unit- JHV-710 маслен чилър
ParameterFEED RATE: Unit- JHV-710
ParameterRapid traverse X Unitm/min JHV-710 30
ParameterRapid traverse Y Unitm/min JHV-710 30
ParameterRapid traverse Z Unitm/min JHV-710 24
ParameterCutting feed rate Unitmm/min JHV-710 1-15000
ParameterX,Y,Z axis servo motor (FANUC) UnitkW JHV-710 1.2/1.2/1.8
ParameterX,Y,Z axis servo motor (MITSUBISHI) UnitkW JHV-710 1.5/1.5/2
ParameterBALL SCREW: Unit- JHV-710
ParameterDiameter of X,Y,Z axis Unitmm JHV-710 32
ParameterPitch of X,Y,Z axis Unitmm JHV-710 12
ParameterAccuracy Unit- JHV-710 C3
ParameterPositioning Unitμ JHV-710 ±5
ParameterRepeatability Unitμ JHV-710 ±3
ParameterATC: Unit- JHV-710
ParameterMagazine type (BT40) Unittype JHV-710 каруселен / с ръка
ParameterTool magazine capacity Unitpcs JHV-710 каруселен: 16 / с ръка: 24
ParameterMax. tool diameter Unitmm JHV-710 каруселен: 100/150 / с ръка: 76/150
ParameterMax. tool diameter - with adjacent tool Unitmm JHV-710 100
ParameterMax. tool length Unitmm JHV-710 250
ParameterMax. tool weight Unitkg JHV-710 7
ParameterTool selection Unittype JHV-710 каруселен: фиксиран / с ръка: произволен
ParameterCOOLANT SYSYEM: Unit- JHV-710
ParameterCoolant motor UnitHP JHV-710 3/4
ParameterTanl volume UnitL JHV-710 200
ParameterOTHERS: Unit- JHV-710
ParameterPower consumption UnitKVA JHV-710 20
ParameterMachine dimensions (LxWxH) Unitmm JHV-710 2300x2450x2770
ParameterMachine weight Unitkg JHV-710 4200

Company

Infomation

JinnFa Bulgaria © 2024  Website Development and Support by Go Live UK
Cookie settings