Name *
Email *
Company *
Message *


                                              Machining centers

Machining centers

JHV-550APC Vertical Machining Center with Automatic Pallet Change System

The JHV series feature 3-axis machining centers, suitable for the production of a wide range of products for the automotive industry, hydraulic and pneumatic components, dies and moulds, diverse prismatic parts, etc.

The major structural components have ...

Load more

Make an inquiry




An automatic two-pallet changer, allowing for simultaneous workpiece machining and next piece clamping. No auxiliary time involved for part loading and unloading.







All vertical machining centers undergo a number of accuracy inspections, including Renishaw's Ball Bar Test and Laser Inspection, with a measurement report available for machine tool customers. For additional information regarding the tests, visit the official Renishaw website.



X/Y/Z axis movement is implemented by hardened, high-precision ball screws, furnished with double nuts to eliminate backlash. 

JHV-550APC vertical machining center can be equipped with a spindle, directly coupled to the motor (choice of up to 15 000 rpm), or a built-in motor spindle (choice of up to 36 000 rpm).

A 24-tool magazine-type ATC allows for rapid tool change and minimum auxiliary operational time.

Tool change time: 1.5 sec (Tool to Tool).

A high-pressure coolant-through-spindle system (20,30,50,70 bar), featuring a separate coolant tank and filter.


Renishaw tool probing system.

Standard Accessories

  • Full splash guard
  • Belt type spindle 10 000 rpm, BT40
  • Spindle motor 7.5/11kW
  • Arm type ATC 24 tools, BT40
  • Rigid Tapping  
  • Cooling system
  • Auto lubrication system
  • Spindle oil cooler unit
  • Heat exchanger
  • Telescopic cover for 3 axes
  • Work lamp
  • Three-color call light
  • Tools and tool box
  • Screw type chip conveyor with chip cart
  • Spindle air blow
  • Air gun
  • Coolant gun

Optional Accessories

  • Belt type spindle 10 000 / 12 000 rpm
  • Direct drive spindle 10 000 / 12 000 / 15 000 rpm
  • Built-in type spindle 16 000 / 36 000 rpm
  • Coolant through spindle (with sealed splash guard), 20/30/70 bar
  • Oil skimmer - belt type
  • Oil skimmer - disk type
  • Chip flushing device
Parameter Unit JHV-550APC
ParameterGUIDEWAYS Unittype JHV-550APC линейни
ParameterDistance between X/Y/Z axis guideways Unitmm JHV-550APC 240/464/320
ParameterWidth of X/Y/Z axis guideway Unitmm JHV-550APC 30/35/35
ParameterTRAVEL: Unit- JHV-550APC
ParameterX axis travel Unitmm JHV-550APC 550
ParameterY axis travel Unitmm JHV-550APC 400
ParameterZ axis travel Unitmm JHV-550APC 460
ParameterDistance from spindle nose to table surface Unitmm JHV-550APC 120-580
ParameterDistance from spindle center to column surface Unitmm JHV-550APC 510
ParameterTABLE: Unit- JHV-550APC
ParameterTable area Unitmm JHV-550APC 600x400
ParameterMax. load of table Unitkg JHV-550APC 200x2
ParameterT-slot Unitmm JHV-550APC 3x14 x100
ParameterPallet changing time Unitsec JHV-550APC 7
ParameterPallet change method Unit- JHV-550APC Смяна на 180° (ротационно)
ParameterSPINDLE: Unit- JHV-550APC
ParameterSpindle taper Unittype JHV-550APC BT-40
ParameterSpindle speed Unitrpm JHV-550APC ремъчен:8000/10000 / директен:10000/12000/15000
ParameterSpindle drive Unittype JHV-550APC ремъчен / директен
ParameterSpindle motor UnitkW JHV-550APC 7.5/11
ParameterSpindle cooling Unit- JHV-550APC маслен чилър
ParameterFEED RATE: Unit- JHV-550APC
ParameterRapid traverse X Unitm/min JHV-550APC 30
ParameterRapid traverse Y Unitm/min JHV-550APC 30
ParameterRapid traverse Z Unitm/min JHV-550APC 24
ParameterCutting feed rate Unitmm/min JHV-550APC 1-15000
ParameterX,Y,Z axis servo motor (FANUC) UnitkW JHV-550APC 1.2/1.2/1.8
ParameterX,Y,Z axis servo motor (MITSUBISHI) UnitkW JHV-550APC 1.5/1.5/2
ParameterBALL SCREW: Unit- JHV-550APC
ParameterDiameter of X,Y,Z axis Unitmm JHV-550APC 32
ParameterPitch of X,Y,Z axis Unitmm JHV-550APC 16/16/12
ParameterATC: Unit- JHV-550APC
ParameterMagazine type (BT40) Unittype JHV-550APC с ръка
ParameterTool magazine capacity Unitpcs JHV-550APC 24
ParameterMax. tool diameter Unitmm JHV-550APC 76/150
ParameterMax. tool length Unitmm JHV-550APC 200
ParameterMax. tool weight Unitkg JHV-550APC 7
ParameterTool selection Unittype JHV-550APC произволен
ParameterOTHERS: Unit- JHV-550APC
ParameterAir supply Unitkg/сm² JHV-550APC 6
ParameterPower consumption UnitKVA JHV-550APC 20
ParameterMachine dimensions (LxWxH) Unitmm JHV-550APC 2000x2960x2360
ParameterMachine weight Unitkg JHV-550APC 3750
Cookie settings