Home > Machining centers > Linear Way Series > JHV-550 Vertical Machining Center

JHV-550 Vertical Machining Center

The JHV series feature 3-axis machining centers, suitable for the production of a wide range of products for the automotive industry, hydraulic and pneumatic components, dies and moulds, diverse prismatic parts, etc.

The major structural components have ...

Make an inquiry

Finite Element Analysis testing and inspection. The structural machine components have been tested under different finite limit stress conditions, so that the areas of largest stress concentration can be defined and reinforced.

All vertical machining centers undergo a number of accuracy inspections, including Renishaw's Ball Bar Test and Laser Inspection, with a measurement report available for machine tool customers. For additional information regarding the tests, visit the official Renishaw website.

X/Y/Z axis movement is implemented by hardened, high-precision ball screws, furnished with double nuts to eliminate backlash.

JHV-550 vertical machining center can be equipped with a spindle, directly coupled to the motor (choice of up to 15 000 rpm), or a built-in motor spindle (choice of up to 36 000 rpm).

A 24-tool magazine-type ATC allows for rapid tool change and minimum auxiliary operational time.

Tool change time: 1.5 sec (Tool to Tool).

A high-pressure coolant-through-spindle system (20,30,50,70 bar), featuring a separate coolant tank and filter.

Renishaw tool probing system.

Standard Accessories

Full splash guard
Belt type spindle 8 000 rpm, BT40
Spindle motor 5.5/7.5kW
Carousel type ATC 16 tools, BT40
Rigid Tapping
Cooling system
Auto lubrication system
Spindle oil cooler unit
Heat exchanger
Telescopic cover for 3 axes
Work lamp
Three-color call light
Tools and tool box
Screw type chip conveyor with chip cart
Spindle air blow
Air gun
Coolant gun

Optional Accessories

Belt type spindle 10 000 / 12 000 rpm
Direct drive spindle 10 000 / 12 000 / 15 000 rpm
Built-in type spindle 16 000 / 36 000 rpm
Arm type ATC 24 tools, BT40
Chain type chip conveyor with chip cart
Coolant through spindle (with sealed splash guard), 20/30/70 bar
Oil skimmer - belt type
Oil skimmer - disk type
Chip flushing device
4th axis rotary table
CNC tilting & rotary table
Tool measurement system
Workpiece measurement system

Parameter	Unit	JHV-550
ParameterSLIDEWAYS	Unittype	JHV-550 линейни
ParameterDistance between X axis guideways	Unitmm	JHV-550 240
ParameterDistance between Y axis guideways	Unitmm	JHV-550 484
ParameterDistance between Z axis guideways	Unitmm	JHV-550 320
ParameterWidth of X/Y/Z axis guideways	Unitmm	JHV-550 30/35/35
ParameterTRAVEL:	Unit-	JHV-550
ParameterX axis travel	Unitmm	JHV-550 550
ParameterY axis travel	Unitmm	JHV-550 400
ParameterZ axis travel	Unitmm	JHV-550 460
ParameterDistance from spindle nose to table surface	Unitmm	JHV-550 120-580
ParameterDistance from spindle center to column surface	Unitmm	JHV-550 510
ParameterTABLE:	Unit-	JHV-550
ParameterTable area	Unitmm	JHV-550 650x410
ParameterMax. load of table	Unitkg	JHV-550 250
ParameterT- slot	Unitmm	JHV-550 3x14x100
ParameterSPINDLE:	Unit-	JHV-550
ParameterSpindle taper	Unittype	JHV-550 BT-40
ParameterSpindle speed	Unitrpm	JHV-550 ремъчен:8000/10000 / директен:10000/12000/15000
ParameterSpindle drive	Unittype	JHV-550 ремъчен / директен
ParameterSpindle motor	UnitkW	JHV-550 5.5/7.5
ParameterSpindle cooling	Unit-	JHV-550 маслен чилър
ParameterFEED RATE:	Unit-	JHV-550 .
ParameterRapid traverse X	Unitm/min	JHV-550 30 (опция: 36/48)
ParameterRapid traverse Y	Unitm/min	JHV-550 30 (опция: 36/48)
ParameterRapid traverse Z	Unitm/min	JHV-550 24 (опция: 36)
ParameterCutting feed rate	Unitmm/min	JHV-550 1-15000
ParameterX,Y,Z axis servo motor (FANUC)	UnitkW	JHV-550 1.2/1.2/1.8
ParameterX,Y,Z axis servo motor (MITSUBISHI)	UnitkW	JHV-550 1.5/1.5/2
ParameterBALL SCREW:	Unit-	JHV-550
ParameterDiameter of X,Y,Z axis	Unitmm	JHV-550 32
ParameterPitch of X,Y,Z axis	Unitmm	JHV-550 12
ParameterATC:	Unit-	JHV-550
ParameterMagazine type (BT40)	Unittype	JHV-550 каруселен / с ръка
ParameterTool magazine capacity	Unitpcs	JHV-550 каруселен: 16 / с ръка: 24
ParameterMax. tool diameter	Unitmm	JHV-550 каруселен: 100/150 / с ръка: 76/150
ParameterMax. tool length	Unitmm	JHV-550 каруселен: 250 / с ръка: 200
ParameterMax. tool weight	Unitkg	JHV-550 7
ParameterTool selection	Unittype	JHV-550 каруселен: фиксиран / с ръка: произволен
ParameterOTHERS:	Unit-	JHV-550
ParameterAir supply	Unitkg/сm²	JHV-550 6
ParameterPower consumption	UnitKVA	JHV-550 20
ParameterMachine dimensions (LxWxH)	Unitmm	JHV-550 1900х2450х2600
ParameterMachine weight	Unitkg	JHV-550 3400

Machining centers

JHV-550 Vertical Machining Center

Company

Infomation

Your cookie settings

Drag the slider across to change your cookie settings