Name *
Email *
Company *
Message *


                                              Machining centers

Machining centers

JHV-1800 Vertical Machining Center

The JHV series feature 3-axis machining centers, suitable for the production of a wide range of products for the automotive industry, hydraulic and pneumatic components, dies and moulds, diverse prismatic parts, etc.

The major structural components have ...

Load more

Make an inquiry

Finite Element Analysis testing and inspection. The structural machine components have been tested under different finite limit stress conditions, so that the areas of largest stress concentration can be defined and reinforced.

All vertical machining centers undergo a number of accuracy inspections, including Renishaw's Ball Bar Test and Laser Inspection, with a measurement report available for machine tool customers. For additional information regarding the tests, visit the official Renishaw website.

A 24-tool magazine-type ATC allows for rapid tool change and minimum auxiliary operational time.


A high-pressure coolant-through-spindle system (20,30,50,70 bar), featuring a separate coolant tank and filter.

Renishaw tool probing system.

A 5-axis tilting rotary table.

An oil chiller ensures constant spindle temperature, improved accuracy and extended spindle life.

Standard Accessories

  • Full splash guard
  • Roller type linear guideway for X,Y axes
  • Box way for Z axis 
  • Belt type spindle 6 000 rpm, BT50
  • Spindle motor 11/15kW
  • Arm type ATC 24 tools
  • Rigid Tapping  
  • Cooling system
  • Auto lubrication system
  • Spindle oil cooler unit
  • Heat exchanger
  • Telescopic cover for 3 axes
  • Work lamp
  • Three-color call light
  • Tools and tool box
  • Screw type chip conveyor with chip cart
  • Spindle air blow
  • Air gun
  • Coolant gun

Optional Accessories

  • Belt type spindle 8 000 rpm
  • Direct drive spindle 10 000/ 12 000 rpm
  • Arm type ATC 32/40 tools
  • Chain type chip conveyor with chip cart
  • Coolant through spindle (with sealed splash guard), 20/30/70 bar
  • Spindle motor 15/18.5kW (upgrade)
  • Spindle motor 18/23kW (upgrade)
  • Two-stage gear box
  • Oil skimmer - belt type
  • Oil skimmer - disk type
  • Chip flushing device
  • 4th axis rotary table
  • CNC tilting & rotary table
  • Tool measurement system
  • Workpiece measurement system
Parameter Unit JHV-1800
ParameterSLIDEWAYS Unittype JHV-1800 линейни (X/Y) + призматични (Z)
ParameterWidth of linear guideways (X,Y) Unitmm JHV-1800 45 (8 блока за всяка ос)
ParameterWidth of box ways (Z) Unitmm JHV-1800 140 (дебелина 55)
ParameterTRAVEL: Unit- JHV-1800
ParameterX axis travel Unitmm JHV-1800 1800
ParameterY axis travel Unitmm JHV-1800 900
ParameterZ axis travel Unitmm JHV-1800 750/900 (опция 1000)
ParameterSpindle nose to table surface Unitmm JHV-1800 150-900 (опция 150-1150)
ParameterSpindle center to column surface Unitmm JHV-1800 950
ParameterTABLE: Unit- JHV-1800
ParameterTable area Unitmm JHV-1800 1850x900
ParameterMax. load of table Unitkg JHV-1800 2500
ParameterT- slot Unitmm JHV-1800 6x18x145
ParameterSPINDLE: Unit- JHV-1800
ParameterSpindle taper Unittype JHV-1800 BT-50
ParameterSpindle speed Unitrpm JHV-1800 6000
ParameterSpindle drive Unittype JHV-1800 ремъчен
ParameterSpindle cooling Unit- JHV-1800 маслен чилър
ParameterFEED RATE: Unit- JHV-1800
ParameterRapid traverse X Unitm/min JHV-1800 24
ParameterRapid traverse Y Unitm/min JHV-1800 24
ParameterRapid traverse Z Unitm/min JHV-1800 15
ParameterCutting feed rate Unitmm/min JHV-1800 1-7000
ParameterBALL SCREW: Unit- JHV-1800
ParameterDiameter of X,Y,Z axis Unitmm JHV-1800 50
ParameterPitch of X,Y,Z axis Unitmm JHV-1800 10
ParameterATC: Unit- JHV-1800
ParameterMagazine type (BT50) Unittype JHV-1800 с ръка
ParameterTool magazine capacity Unitpcs JHV-1800 24T
ParameterMax. tool diameter Unitmm JHV-1800 110/220
ParameterMax. tool length Unitmm JHV-1800 300
ParameterMax. tool weight Unitkg JHV-1800 15
ParameterTool selection Unittype JHV-1800 произволен
ParameterMOTOR: Unit- JHV-1800
ParameterSpindle motor UnitkW JHV-1800 11/15
ParameterX/Y/Z axis motor (FANUC) UnitkW JHV-1800 7/7/7
ParameterX/Y/Z axis motor (MITSUBISHI) UnitkW JHV-1800 7/7/7
ParameterOTHERS: Unit- JHV-1800
ParameterPower consumption UnitKVA JHV-1800 40
ParameterMachine dimensions (LxWxH) Unitmm JHV-1800 5800x4000x3650
ParameterMachine weight Unitkg JHV-1800 17500
Cookie settings