Name *
Email *
Company *
Message *


                                              Machining centers

Machining centers

JHV-2000 Vertical Machining Center

The JHV series feature 3-axis machining centers, suitable for the production of a wide range of products for the automotive industry, hydraulic and pneumatic components, dies and moulds, diverse prismatic parts, etc.

The major structural components have ...

Load more

Make an inquiry

Finite Element Analysis testing and inspection. The structural machine components have been tested under different finite limit stress conditions, so that the areas of largest stress concentration can be defined and reinforced.

All vertical machining centers undergo a number of accuracy inspections, including Renishaw's Ball Bar Test and Laser Inspection, with a measurement report available for machine tool customers. For additional information regarding the tests, visit the official Renishaw website.

A 24-tool magazine-type ATC allows for rapid tool change and minimum auxiliary operational time.

A high-pressure coolant-through-spindle system (20,30,50,70 bar), featuring a separate coolant tank and filter.

Renishaw tool probing system.


A 5-axis tilting rotary table

An oil chiller ensures constant spindle temperature, improved accuracy and extended spindle life.

Standard Accessories

  • Full splash guard
  • Roller type linear guideway for X,Y axes
  • Box way for Z axis 
  • Belt type spindle 6 000 rpm, BT50
  • Spindle motor 15/18.5kW
  • Arm type ATC 24 tools
  • Rigid Tapping  
  • Cooling system
  • Auto lubrication system
  • Spindle oil cooler unit
  • Heat exchanger
  • Telescopic cover for 3 axes
  • Work lamp
  • Three-color call light
  • Tools and tool box
  • Screw type chip conveyor with chip cart
  • Spindle air blow
  • Air gun
  • Coolant gun

Optional Accessories

  • Belt type spindle 8 000 rpm
  • Direct drive spindle 10 000/ 12 000 rpm
  • Arm type ATC 32/40 tools
  • Chain type chip conveyor with chip cart
  • Coolant through spindle (with sealed splash guard), 20/30/70 bar
  • Spindle motor 18/23kW (upgrade)
  • Two-stage gear box
  • Oil skimmer - belt type
  • Oil skimmer - disk type
  • Chip flushing device
  • 4th axis rotary table
  • CNC tilting & rotary table
  • Tool measurement system
  • Workpiece measurement system
Parameter Unit JHV-2000
ParameterSLIDEWAYS Unittype JHV-2000 линейни (X/Y) + призматични (Z)
ParameterWidth of linear guideways (X,Y) Unitmm JHV-2000 45 (8 блока за всяка ос)
ParameterWidth of box ways (Z) Unitmm JHV-2000 140 (дебелина 55)
ParameterTRAVEL: Unit- JHV-2000
ParameterX axis travel Unitmm JHV-2000 2000
ParameterY axis travel Unitmm JHV-2000 900
ParameterZ axis travel Unitmm JHV-2000 750/900 (опция 1000)
ParameterSpindle nose to table surface Unitmm JHV-2000 150-900 (опция 150-1150)
ParameterSpindle center to column surface Unitmm JHV-2000 950
ParameterTABLE: Unit- JHV-2000
ParameterTable area Unitmm JHV-2000 2050x900
ParameterMax. load of table Unitkg JHV-2000 3000
ParameterT- slot Unitmm JHV-2000 6x18x145
ParameterSPINDLE: Unit- JHV-2000
ParameterSpindle taper Unittype JHV-2000 BT-50
ParameterSpindle speed Unitrpm JHV-2000 6000
ParameterSpindle drive Unittype JHV-2000 ремъчен
ParameterSpindle cooling Unit- JHV-2000 маслен чилър
ParameterFEED RATE: Unit- JHV-2000
ParameterRapid traverse X Unitm/min JHV-2000 24
ParameterRapid traverse Y Unitm/min JHV-2000 24
ParameterRapid traverse Z Unitm/min JHV-2000 15
ParameterCutting feed rate Unitmm/min JHV-2000 1-7000
ParameterBALL SCREW: Unit- JHV-2000
ParameterDiameter of X,Y,Z axis Unitmm JHV-2000 50
ParameterPitch of X,Y,Z axis Unitmm JHV-2000 10
ParameterATC: Unit- JHV-2000
ParameterMagazine type (BT50) Unittype JHV-2000 с ръка
ParameterTool magazine capacity Unitpcs JHV-2000 32T (опция)
ParameterMax. tool diameter Unitmm JHV-2000 125/220
ParameterMax. tool length Unitmm JHV-2000 300
ParameterMax. tool weight Unitkg JHV-2000 15
ParameterTool selection Unittype JHV-2000 произволен
ParameterMOTOR: Unit- JHV-2000
ParameterSpindle motor UnitkW JHV-2000 15/18.5
ParameterX/Y/Z axis motor (FANUC) UnitkW JHV-2000 7/7/7
ParameterX/Y/Z axis motor (MITSUBISHI) UnitkW JHV-2000 7/7/7
ParameterOTHERS: Unit- JHV-2000
ParameterPower consumption UnitKVA JHV-2000 40
ParameterMachine dimensions (LxWxH) Unitmm JHV-2000 5800x4000x3650
ParameterMachine weight Unitkg JHV-2000 18500
Cookie settings